preliminary designer's data sheet solid state devices, inc. 14830 valley view ave. * la mirada, ca 90638 phone: (562) 404-7855 * fax: (562) 404-1773 features: 8 amp 1/ 45 volts common anode schottky rectifier to-5 ssr0845ca/5 maximum ratings 45 80 amps 8 1/ amps io i fsm volts symbol units value v rrm v rwm v r r 2 jc 7.0 peak repetitive reverse and dc blocking voltage peak surge current 2/ (8.3 ms pulse, half sine wave superimposed on io, allow junction to reach equilibrium between pulses, t c = 25 o c) maximum thermal resistance 3/ junction to case average total rectified forward current (resistive load, 60hz, sine wave, t c = 25 o c o c/w note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: sh0023a ? extremely low forward voltage drop ? hermetically sealed ? guard ring for overvoltage protection ? eutectic die attach ? 150 o c operating junction temperature ? tx, txv and space level screening available o c -65 to +165 -65 to +200 t op t stg operating and storage temperature notes: 1/ 4 amps per leg; 8 amps total output. 2/ per leg. each leg surged independantely from the other leg. 3/ both legs tied together.
preliminary solid state devices, inc. 14830 valley view ave. * la mirada, ca 90638 phone: (562) 404-7855 * fax: (562) 404-1773 1ma reverse leakage current (rated v r , t a = 100 o c, 300 : s min pulse) 5 i r2 pf 350 c j junction capacitance (v r = 10 v dc , t a = 25 o c, f = 1 mhz) reverse leakage current (rated v r , t a = 25 o c, 300 : s min pulse) i r1 : a case outline: jedec to-5 electrical characteristics (per leg) symbol units maximum v f1 v f2 v f3 0.48 0.56 0.68 instantaneous forward voltage drop 1/ (t a = 25 o c, 300 - 500 : s pulse) v dc 100 ssr0845ca/5 v f4 0.63 instantaneous forward voltage drop (i f = 2 a dc, t a = -55 o c, 300 - 500 : s pulse) v dc i f = 1 a dc i f = 2 a dc i f = 4 a dc pin out: pin 1: cathode pin 2: cathode pin 3: anode case: anode application notes: 1/ vf as measured between pins 1 and 2 within .100" from the case, and pin 3 directly at the case.
|
